认证信息
高级会员 第 2 年
名 称：上海森澜科学仪器有限公司认 证：工商信息已核实
访问量：69208
手机网站
扫一扫，手机访问更轻松
产品分类
公司品牌
品牌传达企业理念
产品简介
| Omnimark Instrument Mark3模块化的水份测定设备用于样品量极大的生产检验。Mark3是根据失重法(Loss On Drying)的测试原理。它主要由两个模块组成，加热和控制模块。加热模块利用红外线石英管加热，使样品均匀地快速受热。控制模块更可同时连接四组加热模块，同时检定四个相同或不同样品，增加检定效率。每个模块可以设定不同的测量参数。在设置菜单中存储的表格可以控制哪个用户可以使用哪个模块，防止从其他人的模块测量引起的混淆，确保测量的可追溯性。 | |
| 另外，Mark 3特别适合用于塑料行业，它在塑料行业的优势（主要与卡氏法水分仪比较）： | |
| 加热失重法原理，检测无需试剂，无后期费用 | |
| 检测时无释放有毒气体，更环保 | |
| 样品无需预处理，操作简便，既能用在实验室也能用在车间现场 | |
| 标准ASTM6980(该标准专门针对塑料水分检测的) | |
| |
2 Models | Mark 3 | Mark 3 HP |
|---|---|---|
| Display of results | 0.01% | 0.001% |
| Balance resolution | 0.001 grams | 0.0001 grams |
| Balance capacity | 100 grams | 100 grams |
| Balance repeatability | +/-0.0005g | +/-0.0001g |
| Recommended working range | 0.02 to 99.98% | 0.005 to 99.995% |
Specifications | |
|---|---|
| Method of Measurement: | Loss on drying via four infrared quartz cylinders |
| Modular configuration: | Control and Heater modules (Optional: up to 4 heater modules) |
| Temperature setting/control: | 30-210o C in one degree increments via RTD sensor， +/- 1oC |
| Temperature steps: | Programmable one or two with selectable ramp rate |
| Standby temperature: | 30-160o C in one degree increments with selectable equilibration time |
| Temperature display: | Display of both target and current temp at each stage of testing and standby |
| Conserve mode clock: | Programmable time by day of week to shut down and wake up analyzer |
| Balance module design: | Monolithic weighing cell with protective stainless steel cover |
| Balance calibration: | Internal calibration weight or external weights accepted for manual calibration |
| Ideal weight: | Audio and visual display for programmable target sample weight addition |
| Target limit alert: | Minimum and maximum programmable limits and screen alert when test done |
| Program storage: | 300 programs with unique settings， alphanumeric naming |
| Result storage: | 999 results with statistics: Average， SD， RSD， high and low |
| Units of measure of results: | Weight， %Moisture， %Solids， %Volatiles， Fuel Moisture， PPM， mg/L |
| Endpoint determination: | Actual slope， Calculation and Time modes |
| Sample ID: | Numeric， incremental， alphanumeric or turned Off |
| Modes of operation: | Standard test， Syringe， "Splash" method or Concentration modes |
| Security mode: | Selectable setup and operation protection with numeric code |
| Graph mode: | Graph of temperature and percentage over time |
| Display: | Quarter VGA with contrast adjustment (black on white or white on black) |
| Keypad: | Sealed membrane with audible tactile feedback |
| Internal printer: | Built-in thermal， 40 character graphic with selectable format |
| Power requirements: | 90-250 VAC 50/60 Hz self adjusting power supply |
| Dimensions (L x W x H): | 16.25'' x 19.5'' x 9.25''， shipping weight 35lbs (includes one heater module) |
| Warranty period: | 2 years， complete parts and labor |
- 推荐产品
- 供应产品
- 产品分类